Register
Log In
Home
Dans Club
August 13, 2022
Offline
does anyone have a source for the grip screws?
My Outdoor Range
Gulf of America
Supporter
Moderators
Dans Club
February 22, 2009
Offline
The standard Dan Wesson grip screw size is either 1 ½” or 1” in length with an 8-32 thread. Since the thread is a common size, easily found at a hardware store, the Dan Wesson owner may discover they have something different than standard, such as a 1 ¼” pan head screw. Any screw that properly fits is just fine.
Technically, the glass is always full; half liquid, half air....
Dans Club
March 28, 2023
Offline
If your looking to buy a grip screws, CZ-USA HAS the regular size but if you want a short one for the smaller grips Jack First has both. I will tell you Jack First is higher priced but they have the largest selection of anyone as far as Dan Wesson Revolvers. I suggest you buy some other stuff if you need any extra parts so you only pay one shipping charge. First pic is from CZ-USA the rest Jack First!
Dans Club
August 13, 2022
Offline
rwsem said
DW Grip ScrewThe standard Dan Wesson grip screw size is either 1 ½” or 1” in length with an 8-32 thread. Since the thread is a common size, easily found at a hardware store, the Dan Wesson owner may discover they have something different than standard, such as a 1 ¼” pan head screw. Any screw that properly fits is just fine.
Just returned from the hardware store I took the original grip screw and sized it on their jig it came out to 6-32 so my question i..s the 8-32 a typo or are you sure that is the correct size, maybe I have an oddball screw but I did take it from one of my DW grips
My Outdoor Range
Gulf of America
2 Guest(s)
