Register
Log In
Home
January 21, 2015
Offline
I have a stainless 38 VH 3 inch bbl rear adjustible sight with the serial number 38 S 00XXXX Monson.. Inside cylinder area is stamped with an S.. no other markings.. Any one run across this model ?Thanks BW
Dans Club
February 24, 2013
Offline
Possibly:
738P (38Sp +P) – also referred to as the Lil’ Dan.
Dans Club
December 7, 2020
Offline
If it's a 5 shot cylinder it's a 738. If it's a 6 shot, Fixed Rear notch sight, it's a Model 708. If it a rear adjustable sight, it's a Model 709(?)
My daughter's Dan Wessons 708 and 738:
Dans Club
February 24, 2013
Offline
Good to know, I just updated my notes I am building on all of the various DW models. I’m building my own database about all of the models. I started with the info available here on DWF, but have been adding information like this to mine to flesh it out. Thanks for sharing!
Supporter
Moderators
January 24, 2009
Offline
KurtB said
Good to know, I just updated my notes I am building on all of the various DW models. I’m building my own database about all of the models. I started with the info available here on DWF, but have been adding information like this to mine to flesh it out. Thanks for sharing!
If you're building a database on models, this thread should help you out... LINK
Dans Club
February 24, 2013
Offline
Thanks Charger, I copied that whole thing and used it as my starting point a couple years ago.
February 16, 2016
Online
Kurt, if you've added things to that list yourself, you should post to that thread and share with everyone.
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
If it has a 3" barrel and rear adjustable sight, most likely the 709. Send us some 
.
to the 
as well!
SMF
A man cannot have too many SuperMags
Dans Club
December 7, 2020
Offline
dw7300 said
I have a stainless 38 VH 3 inch bbl rear adjustible sight with the serial number 38 S 00XXXX Monson.. Inside cylinder area is stamped with an S.. no other markings.. Any one run across this model ?Thanks BW
Pics please
1 Guest(s)
