Log In
April 28, 2018
Offline
My 15-2 4" Is shooting aprox 8" high@ 15-25 yds with rear sight as low as it can go.
Any one else experience this??
February 21, 2011
Offline
Maybe play with your barrel nut to change the tension.
I can move POI about 5" @ 25 yds by re-torquing mine. Try about 1/8 turn for starters & "walk it in". DO NOT re-torque while loaded, of course.
I load 3, fire a 3 round group, empty, & then adjust.
Repeat as needed!
Matthew Quigley on handguns:
âI said I never had much use for one. Never said
I didn't know how to use it.â
Supporter
Dans Club
March 25, 2013
Online
If that doesn't help you can file the the gap of the rear sight down a smidgen. I have never done it but it would work.Â
April 28, 2018
Offline
mister callan said
Maybe play with your barrel nut to change the tension.I can move POI about 5" @ 25 yds by re-torquing mine. Try about 1/8 turn for starters & "walk it in". DO NOT re-torque while loaded, of course.
I load 3, fire a 3 round group, empty, & then adjust.
Repeat as needed!
 Â
I'll try itÂ
ThanksÂ
April 28, 2018
Offline
Ole Dog said
If that doesn't help you can file the the gap of the rear sight down a smidgen. I have never done it but it would work.ÂÂ Â
That was going to be my next project
mister callan said
Maybe play with your barrel nut to change the tension.I can move POI about 5" @ 25 yds by re-torquing mine. Try about 1/8 turn for starters & "walk it in". DO NOT re-torque while loaded, of course.
I load 3, fire a 3 round group, empty, & then adjust.
Repeat as needed!
 Â
I'll try itÂ
ThanksÂ
August 8, 2016
Offline
Get a taller front sight to lower the POI
https://www.ewkarms.com/zen8/index.php?main_page=index&cPath=67_9
DWF Supporters
July 12, 2020
Offline
^^^^^^^^^^^^^^^^^^^^^^^^^
This!!!!!!!!
Dans Club
December 5, 2008
Offline
What type of rear sight do you have? Original or replacement - like Ruger.
April 28, 2018
Offline
Andrew1220 said
Get a taller front sight to lower the POIhttps://www.ewkarms.com/zen8/index.php?main_page=index&cPath=67_9
 Â
Just ordered one
Thanks
Supporter
Moderators
January 24, 2009
Offline
Methinks there may be a 14-1 shroud on there... 
would help. 
April 28, 2018
Offline
Charger Fan said
Methinks there may be a 14-1 shroud on there... Â
It's a mod 15 shroud.
Youthinks wrong.
February 21, 2011
Offline
To be fair I have those fibre-optic front sights on both my barrels.
4" V-H & 6" V-H
With the 6" I have 32 clicks of elevation for a center hold @ 25 yds with a 125 Gr .357 HP at 1350 FPS instrumental.
The 4" is bottomed with .38Spl 158Gr SWC doing 950 Fps @ the same distance
Matthew Quigley on handguns:
âI said I never had much use for one. Never said
I didn't know how to use it.â
April 28, 2018
Offline
mister callan said
To be fair I have those fibre-optic front sights on both my barrels.4" V-H & 6" V-H
With the 6" I have 32 clicks of elevation for a center hold @ 25 yds with a 125 Gr HP at 1350 FPS instrumental.
The 4" is bottomed with .38Spl 158Gr SWC doing 950 Fps @ the same distance
 Â
Thanks for the info. I was shooting .38s
I will put a 6" barrell on and try it.
Supporter
Moderators
January 24, 2009
Offline
Rockhanger said
Charger Fan said
Methinks there may be a 14-1 shroud on there...
 Â
It's a mod 15 shroud.
Youthinks wrong.
 Â
Wouldn't be the first time...any (or just plain pics) to back that up? I'm just curious
1 Guest(s)
