Register
Log In
Home
March 24, 2008
Offline
A friend called and told me of a .44 D.W. that was offered on a local seller's board. Well, heck fire if the gun wasn't 97%+ and priced at $375!! I somehow managed to get it O.T.D. for $370 and a little change.
I am picking it up tomorrow. I've been looking for one for quite a while, but they all seemed to be "up there" so I was in the waiting mode.
Now I'm in the "shooting mode"
More pics to follow when I get this rascal home!
Bob
[Image Can Not Be Found]
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Looks like a niceun!! Congrats on a good deal!
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Yep, Nice job- That's how it begins....
Technically, the glass is always full; half liquid, half air....
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Great deal ... looks to be in fine condition also.
SHOOT
Supporter
Moderators
January 24, 2009
Offline
For that price, I'd say ya done gooood! Congrats on your score.
Dans Club
March 2, 2008
Offline
Very nice deal. I bought one very similar, with a scope on a B Square mount about 2 years ago for $350, IRRC.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
November 14, 2009
Offline
Very nice deal. Once in a while, you can find a great deal.
Happyness is a Hot DW and a pile of used brass!!! Rich
February 11, 2010
Offline
I think that would be in the 
range. Looking forward to more pics !
-Blacktop
March 24, 2008
Offline
Thanks folks. I will pick it up today...after 10am. I'm fired up. I have several D.W.s...but this will be my first .44 Mag. My buddy suggested I could part with the couple S&W .44s after a range seeion with this beast! I may just do that.
Pics on the way.
Bob
August 16, 2010
Offline
I don't feel bad at all for what I paid for mine now. I picked one of the .44Mag's up with the ported barrel for $300. If I find any others at that price you can bet I'll pick them up.
April 25, 2008
Offline
Yep, you did good on that 44.
The Savantist
March 24, 2008
Offline
Well....
I have been trying to get parts for this new (to me) .44!!!
When cocked, the cylinder flies by (about one in three times cocked) the cylinder stop nontch. The cylinder does not always get stopped by the cylinder stop...it fails to come up to come up to catch the notches in the cylinder.
So, Friday, I was visiting with the lady out east at D.W....but she got busy and did not get back with me...UGH!
Actually, the cylinder stop is called a "bolt" (part # 37). It looks as if the previous owner might have had this same problem and then may have "worked" on the spring-loaded pin (in the side of the "bolt")...I'm hoping I will soon have a new "bolt" and then we might just get this revolver to shoot consistantly.
Let's keep the fingers crossed!!!!
Bob
Dans Club
March 2, 2008
Offline
I seem to have developed exactly the same problem, I'll be interested to see how you make out.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
March 24, 2008
Offline
Steve CT,
I will be sure to follow-up with everyone when the part arrives? and the gun is fixed?
Keep the faith!!!
Bob
February 20, 2008
Offline
Hey - let us know - hopw it works out~!
Regardds - Photo
If you're going to drink, don't drive. Don't even putt.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
That cylinder stop bolt is a fitted part -- hope you're a decent gunsmith ... if not, you can replace the spring and plunger first.
SHOOT
March 24, 2008
Offline
SHOOT,
A question sir....
When I tried to locate the spring & plunger in the .44 Mag Schematic...all I see is the stop bolt. Any suggestions as how to describe to D.W. Parts Dept. the specific parts I need/desire. I DO want the spring and plunger as it appears the the plunger has been filed down a bit.
If I wanted the "stop bolt", "spring" & "plunger" ( I do want all of these)...how would you communicate this to the person at D.W.??
I was not sure Pricilla understood my desires over the telephone on Friday afternoon.
Thanks in advance.
Bob Foreman
February 11, 2010
Offline
Ask for part # 34, 36, and 37 for the model 44. She will know. here's a schematic.
http://www.urban-armory.com/cart/blueprints/danw_m44.gif
-Blacktop
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Blacktop was quicker on the draw ... Keep that schematic for future reference--never know when it will come in handy.
SHOOT
February 11, 2010
Offline
SHOOTIST357 said:
Keep that schematic for future reference--never know when it will come in handy.
SHOOT
I even have 6 printed paper copies just in case web links or web favorites go down.
Never count on web info to be there forever, that's just my thought.
-Blacktop
1 Guest(s)
