Register
Log In
Home
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
I found some starline brass for the 32-20 at the gunshow today $15/50--not good price, but not bad either. Also picked up a Lee Factory crimp die for $6.
I'm going to make some pretty stout loads--I know the DW is capable of handling them. Maybe the 100 gr bullets I use in the 32 Mag.
Anybody have any personal favorite loads for 32-20?
SHOOT
December 27, 2010
Offline
shoot:
how about 100 gr 32070 HP-XTP HORNADY bullet with the following powder,
AA no.9 11.5 gr = 1700
H110 13.1 gr =1700
IMR 4227 14.4 gr = 1700
I hope this helps,walt
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
For the time being, I'm going to stick with cast bullets--however, if I find some jacketed cheap, I'll pick them up.
I just sized the Starline brass, so maybe tomorrow I'll put a load together for testing.
SHOOT
December 27, 2010
Offline
Let us know how you make out.
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Although it's pretty stout: 12.5 grains of H110 will push a 124 grain Keith over 1500 fps out of a Ruger 7 1/2" barrel. That's in the 357 mag range.
For "plinking"; 7.5 gr of 2400 under a 115 gr pill.
Due to the strength of the DW, you could start w/ 30 carbine loads.
FWIW,
Ron
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
