Log In
November 27, 2014
Offline
Hi all again ...I have a bunch of 158 gr JHP bullets and just located a half a pound of Winchester 296 in my powder stock and was looking for a good load for my Dan ( no problem with my 1911 just kind of new with the Dan )
                                                  Thanks The Hickk
Supporter
DWF Supporters
October 14, 2010
Offline
Sorry, I can't help.  I have been running 2400 and IMR-4227 for 357 mag.
Support your local IHMSA range.
November 27, 2014
Offline
Well how about some load info for 2400 ...I think my reloading buddy has a small supply of it and I might be able to him out of a pound ...I will be using plated 158 gr X TREME bullets
                                            thanks all the Hick
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Technically, the glass is always full; half liquid, half air....
Supporter
DWF Supporters
October 14, 2010
Offline
My load for 357 mag started with an 8" bull berry made barrel for the T/C contender.  I tried a few charges and 12.3 grains grouped the best for me.  The same load does well out of the revolver.
12.3 grains of 2400
nosler 158 grain HP
CCI 550 primers
Winchester cases
The Lyman book has max charge about 2.5 grains above my load.
As a disclaimer:  all loads need to be carefully worked up.ÂÂ
Support your local IHMSA range.
1 Guest(s)
