Register
Log In
Home
March 27, 2013
Offline
It seems like everyone likes pictures here so I figured I'd create a thread to show off my toys. Hope you like em.
DW 15-2 357, 10"
EWK front fiberoptic sight
Fire Sights, Ruger GP100 rear fiberoptic sight
Supporter
DWF Supporters
February 16, 2013
Offline
That sir is SWEET!!!!!!!
August 29, 2009
Offline
Hey tell is how that firesight is working for you. We've been trying to get some info. on these sights and how they work on the DW's. Thx.
March 27, 2013
Offline
harly said
Hey tell is how that firesight is working for you. We've been trying to get some info. on these sights and how they work on the DW's. Thx.
I picked up the firesight over the weekend and haven't had a chance to take it to the range yet. I will report back once I get some range time with it. I will say that the front roll pin hole protrudes out the bottom of the sight more than the stock one does. That keeps it from seating like the stock one. I'll see if I can get on target with how it sits.
Dans Club
DWF Supporters
April 20, 2010
Offline
Very nice, a tough looking Dan! I really like the looks of that Firesight too, for sure get us a range report when you have time. If it works out you might start a trend for replacement rear sights here.
-Lonwolf
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
March 9, 2013
Offline
Hey SMKYTXN, is that an EWK barrel? If so, what did it come with originally?
That thing looks AWESOME!!!
Thanks
Dans Club
March 2, 2008
Offline
Looks a lot like a Factory Original 10 VH to me.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
March 27, 2013
Offline
Waxxers said
Hey SMKYTXN, is that an EWK barrel? If so, what did it come with originally?
That thing looks AWESOME!!!
Thanks
Thanks. It is a factory 10" barrel. I also have an 8" and 6" for it. It was a little beat up when I bought it, but it's better now. 
April 11, 2013
Offline
Wow! Simply stunning. Super clean looking. I'm gonna have to get one of those EWK front sights.
Happiness is a warm gun...Oh yes it is!
Supporter
Moderators
January 24, 2009
Offline
Good looking 715, thanks for showing it off. And I'm really diggin' those sights!
August 29, 2009
Offline
SMKYTXN said
I picked up the firesight over the weekend and haven't had a chance to take it to the range yet. I will report back once I get some range time with it. I will say that the front roll pin hole protrudes out the bottom of the sight more than the stock one does. That keeps it from seating like the stock one. I'll see if I can get on target with how it sits.
I can see where the tang of the sight sits slightly above the frame - that should be ok. I'm wondering though will the back of the sight adjust down further? It looks like there should be some more adjustment to it to bring the back end down further. If it does pls. shoot us another pic. with it fully bottomed out. Keep an eye on the adjustment screw also to make sure it doesn't go below the top strap and hit the cylinder.
March 27, 2013
Offline
The rear sight is set at it's highest setting in the pictures. The sight will adjust all the way down till it bottoms out on the frame. I will get some pictures later and verify that the elevation screw doesn't protrude below the top strap.
March 27, 2013
Offline
I did try to save us some money today. I called Williams direct to see if the rear sight was available for individual purchase, and if there were any bulk discounts. I know there will be interest in this site from forum members and other DW fans. Unfortunately I would have to be one of their dealers and have an FFL before they would offer me any discounts. It's obvious that the Williams price is high at $62.99 because you can go to Midway and order the set for $46. That being said, Williams will sell you just the rear sight for $45 if you want to call them and place the order.
Now for the range report.
I headed to my local indoor range because it's close and I was pressed for time. I was shooting Winchester white box 38 specials, 130 grain, at 15 yards. To be quick, I will be putting one of these sights on each of my Dans! Sighting was absolutely fantastic. I switched out the 10" barrel for the 8" to see if my point of aim stayed the same and was quickly dissapointed to not have the EWK fiber optic front sight to go along with the Williams rear sight. Here are my shots at 15 yards.
I would say go out and get one of these rear sights immediately. It greatly improved my shooting and enjoyment at the range. Can't wait for another set to come in so I can put them on my 22.
Dans Club
DWF Supporters
April 20, 2010
Offline
Thanks for the range report. I just ordered the sight, I just have to give it a try after seeing it on your Dan.
-Lonwolf
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
Supporter
DWF Supporters
February 16, 2013
Offline
Waxxers said
Hey SMKYTXN, is that an EWK barrel? If so, what did it come with originally?
That thing looks AWESOME!!!
Thanks
Thanks. It is a factory 10" barrel. I also have an 8" and 6" for it. It was a little beat up when I bought it, but it's better now.
What did you clean it up with????
August 29, 2009
Offline
Excellent, thanks for the range report and info. on the Fire Sight. We've been trying to verify how these are working on DW's for a while now....you've given us sufficient info. now to be confident in their performance. Can you also verify the specific model no. of the sight so that we order the correct one? This is the Ruger Redhawk sight, correct?
March 27, 2013
Offline
harly said
Excellent, thanks for the range report and info. on the Fire Sight. We've been trying to verify how these are working on DW's for a while now....you've given us sufficient info. now to be confident in their performance. Can you also verify the specific model no. of the sight so that we order the correct one? This is the Ruger Redhawk sight, correct?
Glad I could be the guinea pig. The specific model number from Williams is #70958 and fits the Ruger GP100, Redhawk, Super Redhawk and Super Blk Hunter. The midway link above should take you right to it. The rear sight alone from Williams is a call in only order. There is not a specific part number for it.
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
Very nice DW and an even better target! Thanks for sharing the eye candy!
A man cannot have too many SuperMags
March 27, 2013
Offline
It looks like I might be acquiring my first large frame Dan today. Take a look at the picture and let me know what you think. It's a 41 magnum with an 8" vented barrel. The seller claims and exact round count of 30! What's a ballpark price on this one?
Supporter
Moderators
Dans Club
February 22, 2009
Offline
In today's market- $500 low, $700 fair, $900 high. I bought two 41s; one for 700, another for 900- but it had a 10" barrel and scope.
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
