November 5, 2015
I put a 2″ pork chop barrel on my 15-1 and the extractor hangs up .will not let cylinder open. I ordered a spacer/from ewk arms hoping the will move barrel forward to give extractor more room to let cylinder open. was thinking any pok chop barrel would work . the Dan Wesson 15-1 came to me with a 6″ barrel ,shoots great very accurate . also have a 15-2 4″ and a 44 mag stainless 8″.
February 1, 2016
March 25, 2013
If you are asking if the Barrel Assembly of a model 12 work on a model 15, then yes. The model 15 rear sight is the same as a 12. A model 15-1(unofficially a-1) has a different rear sight and you may have point of aim problems. If you asking if a model 12 barrel tube will work on a 15 shroud, I would say maybe. The end of the shroud of a 15 is very thin metal and may or may not provide a secure base for the exterior barrel nut. Keep in mind that the model twelve barrel tube is a1/4″ longer than a model 15.
Most Users Ever Online: 60
Currently Browsing this Page:
Ole Dog: 2155
Guest Posters: 87
Site Supporters: 1972ctdc, ar-tex, arcnsparc, Artur, atomar, b4delta, BBinger, bikeridertim, BRM, bunny, bwjones0011, CaptDanDD, Caruso4510, DA....64, Dariusz Gut, dbodom, Dettom, Dr.Seuss, DWpistolpackin, ese927, freerider04, Garfield411N, Garymckenzie, GetAGrip, Headsmaster, hesslism, hester57, Hosspower, JamesF Swidryk, JASJR, john Goldsmith, John Greenley, johnbrandolino, JohnD, JustinPolley, larry260, LG, lonwolf93, Lracmcd, md8232, minmich, ParaNormal, pete, ray, Rimfire, Roberto, SCORPIO, StevenTrate, stovepipe, Sweeney, sweet trigger, Venturerider
Range Officers: brucertx, Dave_Ks, SHOOTIST357, Supermagfan, Tigger, zoommb
Dan’s Club: Boeing, brucertx, bunny, Dan Fan, Dave_Ks, DWpistolpackin, ese927, Garfield411N, Gman1956, jaggman, lbruce, lonwolf93, Lracmcd, mhannon, Michael Berner, Ole Dog, ParaNormal, Rimfire, riverinerat, RonaldSemerena, rwsem, SCORPIO, snake-eye, Steve, Supermagfan, tikit2ryde, Wheelgunner, willy, zoommb
Moderators: lbruce, Charger Fan, rwsem, SCORPIO