Supporter

Moderators
January 24, 2009
OfflineScout728 said
Dan Wesson did not do them "in-house". There was a nickeled Dan that was for sale recently that had a warranty repair ticket on the nickel plating. I should've made a note of who it was.
It's still there...
Looks like the plating company was (photo #94) Benton & Co. Inc.
Too bad a lot of the nickel is so damaged on the shrouds of that gun, otherwise I would love to have it.
Supporter

Moderators

Dans Club
February 22, 2009
Offlinecapt jack said
I have this Pac it’s marked 15-M …. it appears to be nickel finish and unfired is this factory nickel?
To me, that looks like an aftermarket coating like cerekote or similar. It's hard to tell, for certain, from pictures but the trigger looks coated as well.
Technically, the glass is always full; half liquid, half air....
Supporter

Moderators

Dans Club
February 22, 2009
Offlinecapt jack said
if it’s an aftermarket Coating, it’s extremely well done
Is there any way to definitively tell if there has been a Coating applied?
The trigger just looks brand new to me… the gun is pristine unfired
It's just my opinion from one picture but without seeing it in person, no, I can't tell definitively if it's after market or OEM.
Technically, the glass is always full; half liquid, half air....

Dans Club
August 13, 2022
OfflineCharger Fan said
It's still there...
Dan Wesson Arms Model 15 .357 Magnum Revolver Factory Nickel - Revolvers at GunBroker.com : 1214730325
Looks like the plating company was (photo #94) Benton & Co. Inc.
Too bad a lot of the nickel is so damaged on the shrouds of that gun, otherwise I would love to have it.
There’s a company that does amazing refinish work. I had a nickel shotgun redone what are you looking for Ford’s custom gun refinishing?
It looks brand new

Dans Club
August 13, 2022
Offlinethat helps a lot so most likely this is an aftermarket Coating unless DW did it at the factory special order because the 15–M in the crane is 100% done at the factory
Still a bit of a mystery hopefully someone recognizes the 15 – M and can explain the meaning
Thanks again
August 28, 2009
OfflineIt is very difficult to tell the origin and history of the plating on a DW gun since plated guns were not cataloged items. The main difference is that if DW sent it out for plating, it was most likely a new gun (there is no record of DW ever doing in-house plating). If a gun owner sent the gun out for plating, it was most likely a used gun.
The same is true for a 22 pack that I sent out for plating myself. I know the condition of the gun prior to plating (which was "like new"), and only I know this. Anyone down the line that owns this gun could easily say"oh yeah, this was a factory plated 22 pack", and it could not be disputed because no one really knows.
Conversely, I have a set of 15-2's that were "reverse" nickel plate and black coating ( I do not know what the black coating is since "Cerakote" was not an everyday term back in the DW days). I know the history of these guns and I know they were sent out by DW for the plating work. They were also sequentially serialized JCPD-93 / 94, special ordered by the Johnson City Police Dep't. So I personally know these guns were new prior to plating and still remain new to this day.
Not to hijack your thread, but my point is that it is very difficult to tell the history of plated guns, and the important point of knowing who did the work can also help determine the true condition of the gun (new or used prior to plating).
Someday someone else is going to own these 3 beautiful specimens.

I am pretty sure that there were factory nickeled pork chops, whether they were done in house ,or sent out I don't know. I have several bright nickel and there was satin or matte nickel too. The early boxes have a box to check for nickel on the label. I have or seen 11s, 12s, 14s, and 15s but no dash ones. Any dash 2s are likely aftermarket although there might have been a few rare 15-2s in nickel.
Supporter

Moderators
January 24, 2009
OfflineOle Dog said
I am pretty sure that there were factory nickeled pork chops, whether they were done in house ,or sent out I don't know. I have several bright nickel and there was satin or matte nickel too. The early boxes have a box to check for nickel on the label. I have or seen 11s, 12s, 14s, and 15s but no dash ones. Any dash 2s are likely aftermarket although there might have been a few rare 15-2s in nickel.
Agreed, I have early Porkchop boxes with labels marked the same.
I know I've seen a couple dash-2 nickel Pacs that have labels with "nickel" hand written on the labels. I had proof of such labels on my now dead photo host site.
But yes, those jobs were probably farmed out to the best bidder.
1 Guest(s)
Log In
