Log In
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
Well the weather turned nice this afternoon and I had some spare time so I mounted up my new EWK 2.5 BA and went to the rang.  I took along some hand loads, 10.5gn Unique under 240 LSWC  I also had a few 240 XTPS running 16.8gn 2400.  The 10.5 target loads were quite the 'kick' to shoot even as mild as they are in a larger barrel, they had some punch with the shorty.  The 16.8gn 2400 loads were nasty.  They made my hand sting after two cylinders.  Roared like a cannon and produced a nice light show.
 Interestingly enough, I ran into a guy shooting a DW 22 and 15-2.  He was intrigued by my 44, said he didn't know DW made a 2.5 in 44, I said this one is semi-custom.  I told him to drop by here and also pay EWK's website a visit, hope he does. ÂÂ
I am very pleased with the accuracy and control with this BA even running the hotter loads.  Made for some interesting looks from the other shooters when I cut loose the hotter stuff.  I'd say Eric has done a great job, thanks!
BTW here is a quick pic of my target, 15 yds off hand, mix of single and double action.  I didn't readjust the rear sight so I had to get used to it.  The stuff off to the lower left were the first few rounds.
 
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
August 29, 2009
Offline
Looks like it shoots pretty good for a stubby!ÂÂ
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
It does, and I must not have had the barrel nut torqued enough, when I went to clean it, the nut had loosened up a bit. So my last few cylinders were shot with a slightly loose barrel.ÂÂ
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
Nice report!  What did you set gap at? Way to go and thanks!ÂÂ
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
I set it to a tight .006" same as my other non Supermag Dan's.ÂÂ
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
1 Guest(s)
