Register
Log In
Home
August 28, 2009
Offline
Solciting ideas on how to remove stuck grips. I've got a 715 here with a Pach. Gripper that won't budge. I'd like to save the grip but if there's no tricks to removal, they're going under the knife shortly.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Don't cut the gripper 
.... lots of tugging/twisting/pulling will get it off eventually...
SHOOT
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
i agree dont cut do you have an aircompressor? I used to remove stuck handle bar grips just add air to srew hole see if she will blow off. it worked on bikes!
August 28, 2009
Offline
Good idea! I'll go hit it with 120 psi and see what happens.
(EDIT) No such luck.
Supporter
Moderators
January 24, 2009
Offline
You could try the air nozzle blowing down from the top. I haven't had to get that extreme myself, but it might work. Also, you could squirt some penetrating oil in from the top too, then try to arm wrestle it off as the oil helps loosen things up.
Dans Club
March 2, 2008
Offline
Hate to see Grippers get chopped. Try some penetrating oil into the grip screw holes and down both sides from the top, and lots of patience and wiggling.
Note to all who read this-Never install rubber grips on a DW without putting a film of lubricant on the tang and the inside of the grip.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
I personally use vaseline under all my rubber grips... ( no comments from the peanut gallery 
)
SHOOT
July 5, 2009
Offline
If you haven't removed the grip yet after lubricating it, try warming it with a hair dryer (medium heat) to heat up the grip and make it pliable enough for you to wrestle it off. (It's amazing what a liitle heat will do.)
GG
August 28, 2009
Offline
Still wrestling with it. I'll try soaking it overnight in some oil and then some heat. I've tried oil and air from top down, bottom up, twisting, pulling - these things ain't budging so far. 
Thanks for all the tips so far!
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
-- I've been there buddy... It is amazing how tight they can get after sitting for 20+ years. Everytime I get one on GB, I wonder what kind of wrestling match I'm in for....never had to cut one yet !!!
SHOOT
Supporter
Moderators
January 24, 2009
Offline
I thought I was gonna have to cut this one off the first time I used it. It's the tightest fitting Pachmayr I've got.
I quickly learned to squirt some oil on there before I install. One time, I forgot to put the grip screw in before I hit the range…it didn't budge.
I've used it a few more times since then & haven't used the grip screw those times, either…it still doesn't budge & I have to give it couple good yanks to get it off. That's even with using oil first.
August 28, 2009
Offline
You guys are going to love this one……Worked like a charm!!!! LOL!! Now I can get to work on her!!
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
What ever works!!!! I will add that to my removal of grips list.
April 25, 2008
Offline
SHOOTIST357 said:
( no comments from the peanut gallery
SHOOT
But I LIKE peanuts.
The Savantist
Supporter
Moderators
January 24, 2009
Offline
harly said:
You guys are going to love this one……Worked like a charm!!!! LOL!! Now I can get to work on her!!
Now that's one I hadn't thought of, very inventive!
August 6, 2010
Offline
That solution has to go in the list of:
"Hold my beer and watch this!"
Yep, for sure! 
1 Guest(s)
