Register
Log In
Home
January 20, 2013
Offline
ONCE I STARTED COLLECTING I CAN'T STOP!!!!!!!!!!
I JUST GOT AN 8' 44MAG TO GO WITH MY 4 OTHER DW's
SO CAN A 44 MAG BE CONVERTED TO 41 MAG? WILL A 41 MAG CYLINDER FIT THE 44 MAG FRAME? I KNOW THE BARREL(AND SHROUD IF NESSCARY) CAN SWAP
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Just get a 41 maggy- then you'll need a 741 to go with it...that's the best way to do it, if you ask me.
Technically, the glass is always full; half liquid, half air....
March 25, 2008
Offline
the barrels will not swap but the shrouds will. just buy a 41 you won't be disappointed!
Supporter
Dans Club
March 25, 2013
Offline
+1 on Ron's suggestion. You already admitted you can't stop.To answer your question, yes, you can swap a .41 cylinder , but it would have to be done by a fabulous smith or the factory. The threads on the barrels are different and you would need a new cylinder fitted with a new hand, I believe. The shroud would not have the .41 roll mark unless you spent big bucks to buy a matching shroud. What Ron suggested would be cheaper. Now , a .22 mag. is a different story, right Ron. Same barrel and hand and far rarer.
The other Ron, aka Ole Dog
Supporter
DWF Supporters
October 11, 2009
Offline
way to go ron , congs artex
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
Get on over to gunbroker, there is a 41 mag with two barrels listed right now with a decent BIN. May need some bluing but still not a bad $.
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
December 4, 2012
Offline
I like the Popcorn theory,
However I look at like Lay's Potato Chips....Bet ya can't buy just one
Supporter
Moderators
January 24, 2009
Offline
flaflash said
ONCE I STARTED COLLECTING I CAN'T STOP!!!!!!!!!!
Welcome to
Oh, and so far it seems incurable, so don't fight it.
1 Guest(s)
