Register
Log In
Home
August 17, 2010
Offline
Hello,
Ok guy I need you help once again, I am posting a Pic. of what I have. The 2 barrels i have are ported and the shrouds. So just like to know what I have here. THis one came with 4 barrels 2 with ports and 2 without.
Thanks for your help,
Mac
[Image Can Not Be Found]
Dans Club
March 2, 2008
Offline
DW Model 44 V with 6" and 8" BA's.
A word to the wise- make sure you do a real thorough scrubdown inside the shroud after every shooting session, and make sure to clear the barrel ports. I would not shoot any lead bullets in your ported barrels.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
August 17, 2010
Offline
Thank you sir for the infor.
Range Officer
Range Officers
Dans Club
February 28, 2009
Offline
Can't stress hard enough what Steve said. Inadequate cleaning will result in great difficulty separating the barrel and the shroud.
A 12ga. bore brush works very well for the inside of the shroud.
-Mike
February 2, 2009
Offline
You might consider trying the ported and the unported barrels and if the recoil isn't too bad without the ports; to use the unported barrels and the additional advantage of less cleaning and the use of lead bullets.
Happyness is a Hot DW and a pile of used brass!!! Rich
1 Guest(s)
