Register
Log In
Home
September 28, 2011
Offline
So got my second DW a few months ago in near mint condition, a nice surprise.
Started cleaning the gun and finds that the bluing starts to look odd just over the grip, so I take some CLP on a rag and whip on the tang covered by the grip and yepp the bluing goes from hi glans deep dark to dull gray.
Anyone got this problem before ?
( Pic is altered to make the problem more visible )
February 11, 2010
Offline
never seen that before
-Blacktop
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
to the 
. Sorry to hear about the blueing problem. It sounds odd. I wonder if the previous owner may have done some type of dye job to make it sell better. Just a guess on my part.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
Dans Club
DWF Supporters
April 20, 2010
Offline
Is it possible that a previous owner had gone over it with cold bluing? Would not be quite as durable as original hot bluing.
-Lonwolf
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Many DW's exibit a "fogging" in that area. If you look closely, it is polished in a different direction also. Not sure about your DW/CLP experience, but mine is..
DW with CLP inside .... NEVER AGAIN !!!
SHOOT
June 25, 2011
Offline
Mine is messed up there too, same thing. Should we do a study of the numbers?
December 26, 2010
Offline
First, to the forum. From Sweden no less. Cool.
My 22 has done the same thing. I had used CLP on it but never attributed the change to it. As Shoot said, it is a somewhat common occurrence. It hasn't gotten any worse since it first appeared. Be very careful if you try to polish it out. I can't remember who, but somebody here tried to polish it out with Flitz. Unfortunately, he went through the bluing and if I remember correctly eventually sent it out to be re-blued. That experience is why I have just left mine alone. Sorry I'm not more help.
May 3, 2011
Offline
I have seen a little bit of that on DW pistols that have been in storage in styrofoam.
October 13, 2009
Offline
I found out the hard way acidic stuff loves to eat bluing right down to the bare metal!
So be very careful of what the product contents are before applying it to bluing. If it has any acidic content, keep it far away.
November 23, 2011
Offline
Rig Grease is as old as I am and it still works great inside and out on all guns. R S
February 11, 2010
Offline
Ok, I thought you ment CLP ate the bluing off, nobody has every seen that.
Yes some Dans have the fogging on the side plates, yes you can polish
with Flitz and get some of it off. In fact I got one whole side of a 15 looking
perfect after using Flitz and I went too far on the last little spot on the other.
Believe me it takes quite a bit of rubbing to eat through the bluing so don't
be afraid to do a little Flitz.
-Blacktop
September 28, 2011
Offline
Thanks for the welcoming, been lurking for about 2.5 years when i got my first DW.
I only use CLP as a cleaner but not for the dans now.
Going to try Flitz later if i can get a hold of it, the onlyone ho has it here is midway sweden and I refuse to shop there ( a 7,6oz bottle is 60.84$ and he has no stock he orders from US )
May 9, 2011
Offline
Anyone have an input on using Blue Wonder cleaner? I just ordered some but not yet tried it.
Flitz - isn't that an abrasive? If so, it would be a poor choice for a blued finish I think.
1 Guest(s)
