Register
Log In
Home
May 14, 2011
Offline
Came across an 8 inch Model 14 at Tulsa. While I realize the barrels are interchangeable I had never before seen anything other than a 2/4/6 barrel on a 14 before. Barrel is a standard shroud, NOT a vent rib type.
The front sight looks to be proper for the lower rear sight height of the 14.
Is this anything unusual?
Dans Club
March 28, 2023
Offline
February 16, 2016
Offline
8" seems long for a Service carry piece.
Supporter
Dans Club
March 25, 2013
Offline
Was that a model 14 porkchop or a 14-2. If it was a porkchop it was a 15-2 8" shroud with an EWK adapter. If it was a 14-2 it had a 15-2 Vent shroud. They will work the same as the non vented 14-2 shroud but will not shoot to point of aim. The 15-2 front sight is taller and the gun will shoot low unless it has an EWK substitute front sight.
Porkchops were only 2/4/6" , but the dash 2 model 14-2 had an 8" option. Of course, the 10,12 and 15" 15-2 BAs would screw in but they would need to be scoped to shoot to point of aim.
I am sure that is as clear as mud.
February 16, 2016
Offline
Thanks for the pics .. that is a Model 14-2 with the 8" Standard BA.
2 Guest(s)
