Register
Log In
Home
January 22, 2008
Offline
Okay Guys,
Here are the rules for the April Photo Contest. I'm going to make this one a little more difficult.
1) Has to be of a Dan Wesson (High Standard or Mitchell Arms copies allowed)
2) Closeups of the features that make Dan Wesson unique.
Time to work on your macro photography skills! Ken Rockwell has a lot of great info on his site and here is a link to an article on Macro Photography.
Winner receives a DWF 2011 Calender.
Good Luck...
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
might as well put this up again/ Mitchell Arms 357 mag Titan II
April 25, 2008
Offline
OK...I'm in.
Dan Wesson's willingness to offer special fast-twist barrels
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
Dan Wesson offered a large variety of grips and grip styles, due to the single square-post frame extension. By far, the favorite is the Zebrawood...this one from a 1979 15-2.
[Image Can Not Be Found]
The Savantist
Supporter
Moderators
January 24, 2009
Offline
Dang, I can already tell I'm gonna be going in dead last with this one, but here goes. Here's 7 dimpled .375 SM cases in front of the gun that sent their hot lead downrange just yesterday...
hehe 
April 25, 2008
Offline
Dan Wesson was very interested in the handgun silhouette game, and willing to listen to Elgin Gates on what was needed to be competitive. The M40 .357 SuperMag was the result, a massive-frame able to handle rifle-type pressures with a new untested cartridge. The resulting gun was too heavy to make weight, so they came up with the slotted shroud...a trademark of the SuperMags.
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
Among the many collaborations between IHMSA and Dan Wesson was the Silhouette 22 and 722. Special serial numbers are things not often seen on other makes of revolvers. This 722 has the ETG prefix, for Elgin T. Gates.
[Image Can Not Be Found]
The Savantist
Supporter
DWF Supporters
December 16, 2010
Offline
Dan Wesson Barrel close up
Dans Club
March 2, 2008
Offline
This is a GREAT picture featuring the signature design innovation of the Dan Wesson revolver
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
April 25, 2008
Offline
No one else was willing to produce revolvers for hi-powered wildcats. Elgin Gates worked with Dan Wesson to introduce this one in 1995.
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
The development gun for the SRS series.
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
.375 SuperMag wrench
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
Newer barrel nut with 4 slots
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
Fixed barrel Hunter version. The frame has no cutouts for a rear sight.
[Image Can Not Be Found]
The Savantist
April 25, 2008
Offline
Compensated Hunter barrel
[Image Can Not Be Found]
The Savantist
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
Dan Wesson through versatility allows their interchangeable barrell system to mate revolvers of different generations of manufacture to all of their barrell assemblies including these two new 2" .44 magnum examples on both a Norwich and Palmer manufactured frames.
[Image Can Not Be Found]
SMF
A man cannot have too many SuperMags
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Sweeet! SMF, you've been holding out on us. 
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
Dans Club
May 17, 2009
Offline
Phil, oh baby. I know you have more holdouts. Pic, pic, pic.
January 22, 2008
Offline
1 Guest(s)
