Register
Log In
Home
Supporter
DWF Supporters
June 11, 2016
Offline
Will the EWK large frame wrench work on my 357 SM and what shoiuld gap between barrel and cylinder be?
Thanks
Supporter
Moderators
Dans Club
February 22, 2009
Online
It'll work- just need the right pilot. .003" will work well, normally.
Technically, the glass is always full; half liquid, half air....
Supporter
DWF Supporters
June 11, 2016
Offline
Thank you what pilot is requied from EWK?
Supporter
Moderators
Dans Club
February 22, 2009
Online
.357 max is what you need.
Technically, the glass is always full; half liquid, half air....
Supporter
DWF Supporters
June 11, 2016
Offline
EWK only shows a 357 pilot or 375 forlarge frame wrench?
August 29, 2009
Offline
DA....63 said
EWK only shows a 357 pilot or 375 forlarge frame wrench?
It's the .357 pilot - same pilot for large frame .357SM wrench and small frame .357 wrench.
Supporter
DWF Supporters
June 11, 2016
Offline
Thanks much I will get it ordered today!
Supporter
Dans Club
March 25, 2013
Offline
You can use the large frame tool without the 44 cal pilot in a pinch. Just be careful to not damage the nut.
Supporter
DWF Supporters
June 11, 2016
Offline
Thanks everyone for the help I have ordered it and it is already shipped. The clearance should be set to .003 on a Super Mag and not .006 like the normal 357.
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
The proper gap for the .357 Maximum revolver is .002”. For all other large frame and SuperMag revolvers the gap is .006”.
Straight from the DW manual.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
Supporter
DWF Supporters
June 11, 2016
Offline
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
The tighter gap helped with reducing flame cutting. Be sure to keep the cylinder face and forcing cone clean as .002 can grow shut easily with a lot of shooting, also when the gun heats up. I usually use .003 as a warm gun will grow at least a thousandth.
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
Supporter
Dans Club
March 25, 2013
Offline
A warm gun will grow. Sounds pretty prurient Scorpio
1 Guest(s)
