Log In
Supporter
Moderators
January 24, 2009
Offline
When I received my Model 15 'no dash' Porkchop...
...I noticed that I could sure see a lot of daylight at the barrel gap. The feeler gauges said it was sitting at .019...yep, that's gonna need some fixing. Plus, I needed to get in there to clean & lube the stiff action.
(sorry for the pics, I did this at night & my camera was not agreeing with my lighting choice.
)
Once I removed the barrel nut, something interesting became readily apparent. One side has flutes cut into it, to fit a wrench...
...the other side has slots, as all the later flush barrel models have. How about that!
Upon reassembly, I set the b/c gap at .004 & reinstalled the nut back into it's original position, the action feels a ton better now & I'm sure it's gonna be a good shooter. This one is going with me to the range this weekend.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
That's pretty cool. Do you think it is factory, or did someone break ou the Dremel tool?
SHOOT
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Cool find. DWs never cease to surprise me.
Wisdom is merely the realization of how little one knows, therefore I am wise.
                                                              ÂÂ
Supporter
Moderators
January 24, 2009
Offline
That's definitely not done with a Dremel. If it's been modified, it was done by a smith, or an owner who works at a machine shop.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Charger Fan said:
That's definitely not done with a Dremel. If it's been modified, it was done by a smith, or an owner who works at a machine shop.
Hey--I'm a dremel master
...
SHOOT
Supporter
Moderators
January 24, 2009
Offline
SHOOTIST357 said:
Hey–I'm a dremel master
…
Maybe I should rephrase...in the hands of a Dremel master, it could be done. 😛
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Hey Charger the Porkchops look good, pass the mashed taters and gravy. 
Wisdom is merely the realization of how little one knows, therefore I am wise.
                                                              ÂÂ
Supporter
Moderators
January 24, 2009
Offline
Would you like cornbread & honey too? 
Dans Club
March 2, 2008
Offline
SHOOTIST357 said:
Charger Fan said:
That's definitely not done with a Dremel. If it's been modified, it was done by a smith, or an owner who works at a machine shop.
Hey–I'm a dremel master
SHOOT
Sort of like a Jedi Master?
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
2 Guest(s)
