Register
Log In
April 3, 2012
Offline
Want to get an RH shroud from EWK and mount a red dot sight like a Burris FastFire III or an Aimpoint. Am I correct that I would need to also purchase a weaver/picatinny adapter to mount one of those? Thanks for the info.
January 22, 2008
Offline
Crad, you should be able to mount your red dot directly on the shroud like in the photo above. Â
Supporter
June 25, 2013
Offline
Only if you can get a red/green dot that mounts on a 3/8" dovetail with a lug. Also the spacing for the lug is not as wide as a weaver. So the lower screw will ride high.
Endeavor to persevere,
Press on regardless.
Need little, want less, love more.
January 22, 2008
Offline
Thanks for correcting my mistake.Â
Supporter
June 25, 2013
Offline
Jody said
Thanks for correcting my mistake.Â
No mistake, you created an opportunity to share.
Â
Thank you very very much......
Endeavor to persevere,
Press on regardless.
Need little, want less, love more.
Supporter
June 25, 2013
Offline
Now that were on the topic of doing just that, what say you Eric?
There are some inexpensive 3/8" red dot's but they use one of  the mounting screws to drop in the space between the dove tails. I have tried it and the screw diameter is to wide for the gap. The solution seems wider gaps or machining the screw diameter down while leaving the head and threads original. @ EWK_Stuff
But for the Burris FastFire III or an Aimpoint the adapter is needed.
Endeavor to persevere,
Press on regardless.
Need little, want less, love more.
October 13, 2009
Offline
It seems alot of people prefer short eye relief for red dots...see pic below of the RH adapter in action. It would be a possibility to make an adapter for the Burris or Aimpoint, but I don't think the demand is there...
1 Guest(s)
