Register
Log In
January 29, 2013
Offline
I have a .357 15-2 pistol pac that has been in it's original case for over 25 years. Took it out and started cleaning and lubing. The 8" barrel sticks in the shroud. When I turn the barrel, it drops right in. Looked down the bore and down the tube of the shroud. Seems to be okay. I am guessing the barrel is slightly bent. Don't know for sure. Any suggestions would be helpful. I cleaned the barrel and shroud and it seems to work better but still sticking. Can't find any debris or burrs.Â
Supporter
June 25, 2013
Offline
Roll the barrel on a flat surface? Put your palm on one end and roll.
Should see if it's not straight then... nuttin to lose.
Endeavor to persevere,
Press on regardless.
Need little, want less, love more.
Supporter
Moderators
Dans Club
February 22, 2009
Offline
hmm, I've always installed the barrel first and then slid the shroud over it. I've never tried the reverse.
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
