Register
Log In
July 23, 2011
Offline
so loading 357 max 180 gr , i use the small magnum primers ?
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
My sierra manual calls for Federal 205M primers. The Hornady manual calls for Remington 7 1/2 primers.Â
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
May 3, 2011
Offline
Can use the CCI 350 mag too on the Max.
July 5, 2009
Offline
I personally use Winchester small rifle primers (WSR) with my Remington 357 Maximum cases. Regardless of the primers that you end up using, be sure to work with the corresponding reload recipes.
GG
April 25, 2008
Offline
The .357 SuperMag was designed to use small rifle primers. Mine uses Federal 205 or 205M's.
The Savantist
July 23, 2011
Offline
cci has a small primer and a small magnum primer , thats why i was asking , which one would i use ?
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Magnum primers are typically used when loading large charges of slow-burning ball powders such as Winchester 296 (H110). Magnum primers should only be used when the load data indicates it, usually by an asterisk * or two. Particularly until one becomes more experienced with handloading; I'd stay with published loads only. If there is a maximum load listed, reduce it by 5 percent.
Regards, Ron
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
