Register
Log In
Home
May 18, 2023
Offline
Hello from Kansas City. I've been a big revolver fan as long as I have been shooting but didn't start my interest in Dan Wessons until a few years ago when I got my first 15-2 and boy was it an interesting lesson that took me down the rabbit hole of grip screw lengths, carbon locked barrel nuts, and Average Joe tuning methods.
It ended up falling victim to my restless gun trading syndrome but I'm getting back into the arena with a large frame 44 here soon now that I've got a reloading station fully set up for 357, 44 mag, and 45 Colt. I've had a lot of fun so far deep diving through topics and soaking up knowledge.
I may come to regret passing this knowledge on but I am an employee of CZ-USA and if any of you have contacted CZ customer service in the past 5 years for any issues DW related or otherwise, its very likely you have spoken to me. I won't give too much away, but part of my real name is incorporated into my username here.
Hoping with that little bit of info shared, I might be able to pass on some unique knowledge to repay what I take. Didn't even bother asking the crew in NY if Keith, Shane, or Bob are members on here, I guess I'll probably find out soon if so.
Looking forward to being a part of the community!
DWF Supporters
July 12, 2020
Offline
Welcome to the forum from PA!!!!
It is nice to have an insider here, I don't think Keith or Bob (Serva/or the retired revolver smith?) are active on here or members at all?????
It's nice to see Keith has taken up the revo repair on a somewhat limited schedule.
Dans Club
February 24, 2013
Offline
To the 
from central IL!!!
Glad to have ya here, this is a great place filled very knowledgeable DW owners.
And, we all love to see pics so be sure to share your Dans with us!
Supporter
DWF Supporters
June 11, 2016
Offline
Welcome to the Forum from Wisconsin.
May 18, 2023
Offline
Thanks everyone. I was referring to Bob Collins the smith who retired recently. Bob Serva was a little before my time at least as far as his involvement with DW.
As far as pics goes, here was my old 15-2 before it found a new home. KurtB it almost looks like a twin to the 15-2 in your pic on the far right minus the vent rib. Will update the large frame section once the 44 I bought is in my hands!
February 8, 2014
Offline
Welcome to the forum. And thanks for your help with the DWs from CZ.
Steve
Steve S.
DWF Supporters
March 28, 2023
Offline
Welcome to the forum! nice to have an insider we can hit up with questions. One off the top of my head when looking at barrels (by the way, you will get a lot of revolver questions here) you see a thing that says new shroud next to the listing. I thought it had to do with being a shroud that fit a CZ made newer 715 but when I talked to a friendly CZ person he said it was just to say it was not a pork chop. It's a bit confusing because it's right next to other listings so I always thought they were different. Why does it not say that on all the listings then?
February 16, 2016
Offline
Dans Club
December 5, 2008
Offline
Welcome to the Forum!
May 18, 2023
Offline
Stmstan 445 said
Welcome to the forum! nice to have an insider we can hit up with questions. One off the top of my head when looking at barrels (by the way, you will get a lot of revolver questions here) you see a thing that says new shroud next to the listing. I thought it had to do with being a shroud that fit a CZ made newer 715 but when I talked to a friendly CZ person he said it was just to say it was not a pork chop. It's a bit confusing because it's right next to other listings so I always thought they were different. Why does it not say that on all the listings then?
The impression I was given in the past was that the small frames on the old 15-2 are slightly dimensionally different than the small frames on the new 715 guns. This isn't a massive difference and older, small frame, non pork cop shrouds will work on new frames and vice versa. The fit will just be slightly off where the rib on the barrel meets the top strap of the frame, it will not line up exactly. I used to have a picture that illustrated this and I'm kicking myself now for losing it since I can't remember which was which but I BELIEVE a 15-2 barrel rib will sit slightly lower than the height of the top strap on a 715 and a 715 (or "newer") shroud will jut up proud against the top strap on a 15-2 frame.
With adjustable sights this isn't a big deal as far as function goes, but obviously there is the cosmetic concern that some people rightly have as well. That's why you'll notice only 357 barrel assemblies have this disclaimer as large frame and supermag frames were only ever one size.
If anybody has knowledge that conflicts with this, please don't hesitate to set me straight!
Dans Club
February 24, 2013
Offline
foxesv said
As far as pics goes, here was my old 15-2 before it found a new home. KurtB it almost looks like a twin to the 15-2 in your pic on the far right minus the vent rib.
Yes it does! I bought that pistol as a pack from KarlH right here on the DWF.
March 26, 2023
Offline
Welcome! I’m also very new around here and am getting accustomed to to forum. Everyone has been super nice and the wealth of knowledge, tips and insight is astounding.
Supporter
Moderators
January 24, 2009
Offline
foxesv said
Looking forward to being a part of the community!
And we are looking forward to having you here!
Soo, so far you have just the 15-2 (great looking specimen BTW & thanks for sharing it with us), with another 44 coming soon? That's a great way to kick start a case of 
"Dan Wesson Acquisition Syndrome". 
1 Guest(s)
