<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
	    <channel>
        <title>Dan Wesson Forum - Forum: New Members Introduction</title>
        <link>https://www.danwessonforum.com/forum/new-members-introduction/</link>
        <description><![CDATA[The Legend Lives On...]]></description>
        <generator>Simple:Press Version 6.11.15</generator>
        <atom:link href="https://www.danwessonforum.com/forum/new-members-introduction/rss/" rel="self" type="application/rss+xml"/>
		                <item>
                    <title>Ole Dog on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153714</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153714</guid>
					                        <description><![CDATA[<p>Yeah, the Wolff trigger return spring is what really helps a DW small frame. The reduced power hammer spring/main spring doesn't really do much. </p>
<p>  Smith's DA are awesome. Especially a Registered Magnum. RMs are the only Smith revolver with a spring holding the cylinder open until you close it. I also highly recommend Taurus revolvers for the way the DA stages and becomes essentially a SA if you so desire. </p>
]]></description>
					                    <pubDate>Fri, 30 Oct 2026 16:15:02 -0400</pubDate>
                </item>
				                <item>
                    <title>redwood on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153712</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153712</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>Ole Dog said </strong><br />
I have a number of NOS unfitted hands . Anyone who can retime a DW can surely fit a hand. I have used used hands in assembling small frame Dan's from bare frames and have had no timing issues. Even though they are considered factory fitted parts, the use of MIM lockwork instead of forged ,hand fitted parts means that all the fitting of hand to rachet are identical. In my experience. I have both used and unused if you need one.  Don't tell anyone, but there would be at no charge. I'm sooo funny. I could include a plunger spring too. <br />
  </p>
</blockquote>
<p>Y'all are too nice, really</p>
<p>I'm quite alright - happy with my new toy now!</p>
<p>She times and shoots, but my goodness she needs a Wolff kit - I've gotten quite spoiled with my S&#038;W's :p</p>
]]></description>
					                    <pubDate>Fri, 30 Oct 2026 15:20:57 -0400</pubDate>
                </item>
				                <item>
                    <title>Ole Dog on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153702</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153702</guid>
					                        <description><![CDATA[<p>I have a number of NOS unfitted hands . Anyone who can retime a DW can surely fit a hand. I have used used hands in assembling small frame Dan's from bare frames and have had no timing issues. Even though they are considered factory fitted parts, the use of MIM lockwork instead of forged ,hand fitted parts means that all the fitting of hand to rachet are identical. In my experience. I have both used and unused if you need one.  Don't tell anyone, but there would be at no charge. I'm sooo funny. I could include a plunger spring too. </p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 15:38:48 -0400</pubDate>
                </item>
				                <item>
                    <title>Scout728 on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153701</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153701</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>redwood said </strong></p>
<blockquote class="spPostEmbedQuote">
<p>rwsem said<br />
Thanks, there's nothing that really jumps out at me to indicate a previous owner filed on the hand.  But, given the fact the hand doesn't rotate the cylinder like it should, I'm still leaning towards this. Maybe a part was switched in it's life and they never really matched up 100%? <br />
One other thing to check- make sure the side plate is fully seated.  If it's not, the hand could be slipping out of place a bit and induce the problem.<br />
If that's not it- let me look around this weekend to see if I have an ejector and hand that I know work together and I could mail them to you to try out.  Kind of a diagnosis-by-replacement situation. If that works, then you could order the parts from Dan Wesson or maybe another member has some old stock to sell?    <br />
  </p>
</blockquote>
<p>Very kind of you to offer sir - I've remediated the problem now by timing the bolt to drop earlier<br />
Both CZ and my gunsmith friend agree with you - it's very likely a worn hand and a weak hand spring (the latter is particularly frustrating as it's a brand new spring from CZ). Is timing the bolt earlier the "correct" fix? Not really, but this particular example isn't winning any awards for collectibility and I don't wanna drop hundreds on getting a new hand fitted sooooo *shrug*<br />
Much thanks to the wisdom and community of this forum, hope to stick around (speaking of old stock though, anyone got an extra wolff upgrade pak I could buy)<br />
  </p>
</blockquote>
<p>New Hand:</p>
<p><a href="https://shop.cz-usa.com/dwr0038s.html" rel="nofollow" target="_blank">https://shop.cz-usa.com/dwr0038s.html</a></p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 14:46:03 -0400</pubDate>
                </item>
				                <item>
                    <title>Stinger on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153700</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153700</guid>
					                        <description><![CDATA[<p><img class="spSmiley" style="margin:0" title="dwf-welcome" alt="dwf-welcome" src="https://www.danwessonforum.com/wp-content/forum-resources/forum-smileys/dwf-welcome.gif" /></p>
<p>Nice grips for sure.</p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 11:25:45 -0400</pubDate>
                </item>
				                <item>
                    <title>KTR on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153699</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153699</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>3ric said </strong><br />
Nice work on the medallions! The Hogue grips are awesome; I have them on two out of three of my DW’s. Enjoy!<br />
  </p>
</blockquote>
<p>Thanks! I am pretty happy with how the medallions came out, and thankful Hogue still makes these grips.  </p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 10:38:50 -0400</pubDate>
                </item>
				                <item>
                    <title>KTR on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153698</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153698</guid>
					                        <description><![CDATA[<p>Thank you! still need to bring it to the range. </p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 10:05:57 -0400</pubDate>
                </item>
				                <item>
                    <title>redwood on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153697</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153697</guid>
					                        <description><![CDATA[<blockquote class="spPostEmbedQuote">
<p><strong>rwsem said </strong><br />
Thanks, there's nothing that really jumps out at me to indicate a previous owner filed on the hand.  But, given the fact the hand doesn't rotate the cylinder like it should, I'm still leaning towards this. Maybe a part was switched in it's life and they never really matched up 100%? <br />
One other thing to check- make sure the side plate is fully seated.  If it's not, the hand could be slipping out of place a bit and induce the problem.<br />
If that's not it- let me look around this weekend to see if I have an ejector and hand that I know work together and I could mail them to you to try out.  Kind of a diagnosis-by-replacement situation. If that works, then you could order the parts from Dan Wesson or maybe another member has some old stock to sell?    <br />
  </p>
</blockquote>
<p>Very kind of you to offer sir - I've remediated the problem now by timing the bolt to drop earlier</p>
<p>Both CZ and my gunsmith friend agree with you - it's very likely a worn hand and a weak hand spring (the latter is particularly frustrating as it's a brand new spring from CZ). Is timing the bolt earlier the "correct" fix? Not really, but this particular example isn't winning any awards for collectibility and I don't wanna drop hundreds on getting a new hand fitted sooooo *shrug*</p>
<p>Much thanks to the wisdom and community of this forum, hope to stick around (speaking of old stock though, anyone got an extra wolff upgrade pak I could buy)</p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 05:45:36 -0400</pubDate>
                </item>
				                <item>
                    <title>Supermagfan on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153696</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153696</guid>
					                        <description><![CDATA[<p><img class="spSmiley" style="margin:0" title="dwf-welcome" alt="dwf-welcome" src="https://www.danwessonforum.com/wp-content/forum-resources/forum-smileys/dwf-welcome.gif" /> to the <img class="spSmiley" style="margin:0" title="dwf" alt="dwf" src="https://www.danwessonforum.com/wp-content/forum-resources/forum-smileys/dwf.gif" /> and nice find on the lightly used 15-2.  The grips are awesome!</p>
<p>SMF </p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 05:40:19 -0400</pubDate>
                </item>
				                <item>
                    <title>DA....64 on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153695</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153695</guid>
					                        <description><![CDATA[<p>Welcome to the Forum from Wisconsin.  Enjoy it!</p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 03:44:20 -0400</pubDate>
                </item>
				                <item>
                    <title>605Dart on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153694</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153694</guid>
					                        <description><![CDATA[<p>Welcome to the forum from PA!!! Nice grab!</p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 01:51:32 -0400</pubDate>
                </item>
				                <item>
                    <title>rwsem on Howdy folks</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153692</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/howdy-folks/#p153692</guid>
					                        <description><![CDATA[<p>Thanks, there's nothing that really jumps out at me to indicate a previous owner filed on the hand.  But, given the fact the hand doesn't rotate the cylinder like it should, I'm still leaning towards this. Maybe a part was switched in it's life and they never really matched up 100%? </p>
<p>One other thing to check- make sure the side plate is fully seated.  If it's not, the hand could be slipping out of place a bit and induce the problem.</p>
<p>If that's not it- let me look around this weekend to see if I have an ejector and hand that I know work together and I could mail them to you to try out.  Kind of a diagnosis-by-replacement situation. If that works, then you could order the parts from Dan Wesson or maybe another member has some old stock to sell?    </p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 01:04:37 -0400</pubDate>
                </item>
				                <item>
                    <title>rwsem on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153691</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153691</guid>
					                        <description><![CDATA[<p>Welcome to the DWF!  Nice job- no go shoot it!</p>
]]></description>
					                    <pubDate>Thu, 29 Oct 2026 00:50:29 -0400</pubDate>
                </item>
				                <item>
                    <title>3ric on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153690</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153690</guid>
					                        <description><![CDATA[<p>Nice work on the medallions! The Hogue grips are awesome; I have them on two out of three of my DW’s. Enjoy!</p>
]]></description>
					                    <pubDate>Wed, 28 Oct 2026 23:32:36 -0400</pubDate>
                </item>
				                <item>
                    <title>KTR on Didn't think revolvers were for me... but..</title>
                    <link>https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153688</link>
                    <category>New Members Introduction</category>
                    <guid isPermaLink="true">https://www.danwessonforum.com/forum/new-members-introduction/didnt-think-revolvers-were-for-me-but/#p153688</guid>
					                        <description><![CDATA[<p><a class="spShowPopupImage" title="Click image to enlarge" data-src="https://www.danwessonforum.com/wp-content/gallery/rolandtkhotmail-com/2026/10/20261026_172131.jpg" data-width="3000" data-height="3198" data-constrain="1"><img src="https://www.danwessonforum.com/wp-content/gallery/rolandtkhotmail-com/2026/10/_thumbs/_20261026_172131.jpg" class="sfimagetop spUserImage" title="20261026_172131.jpg" alt="20261026_172131.jpg" /><img src="https://www.danwessonforum.com/wp-content/forum-resources/forum-themes/reboot/images/lightpack/sp_Mouse.png" class="sfimagetop sfmouseother" alt="Image Enlarger" /></a></p>
<div style="clear:both"></div>
<p><a class="spShowPopupImage" title="Click image to enlarge" data-src="https://www.danwessonforum.com/wp-content/gallery/rolandtkhotmail-com/2026/10/20261028_152207.jpg" data-width="3000" data-height="2366" data-constrain="1"><img src="https://www.danwessonforum.com/wp-content/gallery/rolandtkhotmail-com/2026/10/_thumbs/_20261028_152207.jpg" class="sfimagetop spUserImage" title="20261028_152207.jpg" alt="20261028_152207.jpg" /><img src="https://www.danwessonforum.com/wp-content/forum-resources/forum-themes/reboot/images/lightpack/sp_Mouse.png" class="sfimagetop sfmouseother" alt="Image Enlarger" /></a></p>
<div style="clear:both"></div>
<p>Honestly never saw the appeal in revolvers.  Something sets the DW 15-2 apart.  The innovation, quality, barrel options...</p>
<p>Anyway, managed to pick up a revolver an older lady only put a cylinder through on Sunday.. as they say. </p>
<p>Cleaned it (barely needed it) installed Wolff springs and moded a Hogue grip and some medallions, not too shabby.. </p>
]]></description>
					                    <pubDate>Wed, 28 Oct 2026 18:39:50 -0400</pubDate>
                </item>
				    </channel>
	</rss>
