Log In
March 21, 2014
Offline
15-1 with a 2 1/2 and a 6 in. barrel, dad bought new in the late 70's. *Sorry, meant to put this in the picture thread, not as a separate topic. Not sure where I went wrong, but did.
September 1, 2010
Offline
Nice looking and thanks for the picture.
Supporter
Moderators
January 24, 2009
Offline
I moved your thread to the picture area for you. 
Your gun is actually a 15-1 model. The 15-2 model lost the "Porkchop" leg on the bottom of the barrel shroud. This link should help explain...
https://www.danwessonforum.com/archive/shroud-types/
Thanks for showing off your great looking DW, and
to the
Woops, almost forgot...I suggest that you do not use your original barrel wrench. Those have a tendency to slip & round off the notches on the barrel nut. Get a better style wrench from EWK (left side bar), and you'll be able to swap barrels worry free. 
March 21, 2014
Offline
Appreciate the move, and the correction.
Will order the wrench in a bit, and yes, the older wrench slips if you're not
applying firm pressure against the muzzle at all times while using it. I am not
in the habit of swapping barrels very often, so no damage yet...
